Boating and Sailing Accessories

Condor Universal E-Track Adapter Kit - UNIV-E TRACKagrandirCondor Universal E-Track Adapter Kit - UNIV-E TRACK
Designed to be used with Condor wheel chocks Quickly and securely attach Condor chocks to the E-track on any trailer platform Adjust the position of the Condor chocks anywhere along the E-track Adjust side-to-side between 27 in. and 46 in. wide Includes all necessary hardware including a boomerang bar Made from heavy-duty plated steel NOTE: E-Track and wheel chock not included Included Items: (1) 22.5 Large square tube w/holes (1) 15 in. Small square tube no holes (3) E-Track mounting brackets (1) Allen wrench (2) Shoulder bolts (4) Buttonhead screws (4) 5/16-18 Flathead socket cap screws (1) Boomerang bar (4) E-Track clips (2) 1/2 x 5-1/4 in. Pins w/clips (2) E-Track brackets (1) Instructions

Dennis Kirk
122.55 €
Voir l'Offre

Specialty Materials Vinyl PolybagFlex 15 x 15 feet : WhiteagrandirSpecialty Materials Vinyl PolybagFlex 15 x 15 feet : White
A great solution for pressing heat transfer material onto textiles of high heat sensitivity, including polypropylene bags. It presses on at an incredible 285 degrees F for 5 seconds, with a repress time of 10 seconds. This is available in the three most popular colors in the heat transfer industry: white, black, and red and has a semi-gloss finish. Specifications:Adheres to: Polypropylene bags and other heat sensative materialsTransfers at 285 degree F for 5 secondsRecommended 45 degree bladeApplication and care:Peel WARM or COLDDo not dry cleanBe advised that dye migration has occurred with low energy dyes in polyester and poly-blend fabrics.

Heat Press Nation
39.25 €
Voir l'Offre

Heavy Duty Shaper SS-3528-STagrandirHeavy Duty Shaper SS-3528-ST

Elite Metal Tools
4945.00 €
FREE SHIPPING ON ALL COMMERCIAL ORDERS!
Voir l'Offre

JIMS Shift Pedal Shaft Bushing Tool - 5518agrandirJIMS Shift Pedal Shaft Bushing Tool - 5518
For models listed w/5- or 6-speed transmission Time-saving tool removes worn shift shaft bushings in Big Twin primaries without having to remove the inner primary Tool also will install new bushings to the correct location Bushings can be swapped out in approximately 20 minutes using this tool - a huge time saver Made in the U.S.A. Included Items: (1) Shifter shaft bushing remover (1) Shifter shaft bushing installer nut (1) Shifter shaft bushing installer (1) 5/16-18 x 4 Button head bolt (1) 5/16 Flat washer Instructions

Dennis Kirk
86.99 €
Voir l'Offre

Love Jugs Polished Stainless Original Bullets V-Twin Cooling System -agrandirLove Jugs Polished Stainless Original Bullets V-Twin Cooling System -
What it is: Love Jugs are the worlds leading forced air cooling system for Harley-Davidson Motorcycles. What they do: Love Jugs consists of two very powerful fans directing high velocity air streams at the source of the heat producing area of the Harley engine. Why you need it: Air-cooled engines depend on airflow to cool the engine, when stopped or when moving slowly, there is no, or not adequate, airflow that is required for cooling the engine, thereby causing the engine to rapidly overheat. Love Jugs are perfectly engineered to solve this problem. List of benefits: The benefits are numerous, dramatically lower engine temperature, cooler oil temperature along with higher oil pressure. Prolonged engine life, along with better performance, increased rider and passenger comfort. Ability to ride comfortably on hot summer days. In short, because the motorcycle engine runs cooler, ALL heat related problems are lessened or eliminated. What theyre made of: All parts are custom made to our order. The one piece Stainless Steel construction of the main frame and fan enclosures are guaranteed for five years. Two custom made proprietary high velocity fans supply very powerful air streams. All parts and workmanship is the highest quality. Love Jugs are rated for 20,000 hours of use under normal conditions. Love Jugs are completely waterproof. What else you need to go with it: Everything required for installation on all Harley Davidson's with a side mounted horn is included with every Love Jugs package. Optional Frame mounting kits are available for many Harley models. The Frame mount kits provide the most secure and best possible mounting positioning, and most importantly, remove the cooling system and horn from the engine and mounts it to the bike's frame. These useful options do for excessive vibration what Love Jugs do for excessive heat - they solve the problem. What they fit: Love Jugs fit 98% of all Harley Davidson's. If your Harley has a left side mounted horn, Love Jugs will bolt on to your bike in 15 - 45 minutes depending on the desired installation method. For 2014- H-D Touring models, order an 8-pin power adapter, Dennis Kirk PART NO. 49-02693 for plug-n-play installation. The most important detail for maximum performance and longevity of your Love Jugs is how you install them on your bike. Currently, there are four installation options. They are listed in order of desirability, with option# 4 being the most desirable. STANDARD ENGINE MOUNT: Mount your Love Jugs to the engine via the Harley horn mounting bracket with the supplied thick vibration damper. Pros .. Everything for a horn mount installation is included in our box. The average installation time is about half an hour. Cons .. Your Love Jugs and horn assembly are mounted to your engine via the Harley horn mounting bracket. This will vibrate the most of the four available installation options. Optional VIBRATION MASTER (Part No. 27-5035/VM-1). The Vibration Master is the most desirable option if your bike will not accept our Frame Mount Kit. The V-M is an attractive and Heavy Duty method of mounting your Love Jugs to your engine via the Harley horn mounting bracket. Its a real work horse. Two heavy duty vibration dampers encased in a highly polished Stainless Steel enclosure, replace the stock Harley vibration damper. The V-M is guaranteed against any type of failure for 5 years. Pros .. A very secure and attractive mounting method that is superior to mounting your Love Jugs directly to the Harley horn mounting bracket. The V-M positions your Love Jugs perfectly for maximum cooling effectiveness. Installation time is about 5 minutes. Will still look perfect 10 years from now due to the Stainless Steel construction of the Vibration Master. Cons.. Love Jugs are mounted directly to the engine. As reported by our customers there is a significant reduction of vibration to the Love Jugs on most models, but it is not as effective on some bikes. Why is that? Many factors that a

Dennis Kirk
349.00 €
Voir l'Offre

Chatterbox Duo Pro Bluetooth Intercom Kit - CBDUOPKITagrandirChatterbox Duo Pro Bluetooth Intercom Kit - CBDUOPKIT
The Limited range models are ideal for riders who only ride with one other person or alone. The DUO Pro model uses binary CDMA technology to communicate full duplex (conference call style) to another DUO. It is suggested for this model to be used as a rider to passenger on the same bike intercom. The DUO features Bluetooth which allows you to pair with up to two accessory devices (cell phone, GPS, mp3/iPOD) at the same time. You and your passenger can either listen to your own music device or share one music device between the two of you. When riding alone you can still be in touch by having your cell phone and/or music device paired. This model is deal for the rider who commutes on a daily basis. Available in either full or open face depending on your helmet style. The DUO kit includes the following: Unit, noise suppression Hi-Fidelity headset, factory installed Lithium Ion rechargeable battery, mounting hardware, wall charger and users manual. BIKE TO BIKE COMMUNICATION Intended Users: Single users or Two users Maximum range of communication: 100 yards Maximum number of users in communication: 2 Communication method: Full duplex Compatible devices: Duo RIDER TO PASSENGER COMMUNICATION Need a separate unit for passenger BLUETOOTH FEATURES WITH REMOTE CONTROL (AVRCP) Wirelessly answer phone calls Wirelessly listen to your music Wirelessly listen to navigation voice direction Remote control (AVRCP) GENERAL FEATURES Battery: Rechargeable Li-Poly Water resistance casing Package Contents Universal Headset Kit (full face only): CBDUOKIT Universal headset DUO includes: Full face microphone only: CBDUOHS USB Charger Rechargeable Li-Poly Mounting Bracket

Dennis Kirk
76.49 €
Voir l'Offre

Bywilde Dark Olive Gray Fabric Queen Bed (1Set/3Ctn) (Dark Olive Gray Fabric, 94L x 67W x 43H), GreyagrandirBywilde Dark Olive Gray Fabric Queen Bed (1Set/3Ctn) (Dark Olive Gray Fabric, 94L x 67W x 43H), Grey
Enhance the look of your room with the clean lines of this Bywilde queen bed with a low-profile footboard and neutral grey fabric. This bed has two large pillows against the headboard, making it a comfortable place to lean back and read a book. The included hardware makes assembly quick and convenient. Bywilde dark grey bed has clean lines that don't overpower your room Two-pillow headboard provides a comfortable place to lean against Includes one queen bed and hardware for assembly Made from wood and fabric with chrome legs Solid grey bed has a low-profile footboard Bed measures 43 inches high x 67 inches wide x 94 inches long Mattress, box spring, and bedding (comforter, sheets, pillows, etc.) are NOT included. Assembly required. Please note: Orders of 151 pounds or more will be shipped via Freight carrier and our Oversized Item Delivery/Return policy will apply. Please click here for more information. This product will ship to you in multiple boxes. Assembly Required

Overstock.com
867.49 €
Everyday Free Shipping Over $50
Voir l'Offre

Love Jugs Polished Stainless Original Slots V-Twin Cooling System - SDagrandirLove Jugs Polished Stainless Original Slots V-Twin Cooling System - SD
What it is: Love Jugs are the worlds leading forced air cooling system for Harley-Davidson Motorcycles. What they do: Love Jugs consists of two very powerful fans directing high velocity air streams at the source of the heat producing area of the Harley engine. Why you need it: Air-cooled engines depend on airflow to cool the engine, when stopped or when moving slowly, there is no, or not adequate, airflow that is required for cooling the engine, thereby causing the engine to rapidly overheat. Love Jugs are perfectly engineered to solve this problem. List of benefits: The benefits are numerous, dramatically lower engine temperature, cooler oil temperature along with higher oil pressure. Prolonged engine life, along with better performance, increased rider and passenger comfort. Ability to ride comfortably on hot summer days. In short, because the motorcycle engine runs cooler, ALL heat related problems are lessened or eliminated. What theyre made of: All parts are custom made to our order. The one piece Stainless Steel construction of the main frame and fan enclosures are guaranteed for five years. Two custom made proprietary high velocity fans supply very powerful air streams. All parts and workmanship is the highest quality. Love Jugs are rated for 20,000 hours of use under normal conditions. Love Jugs are completely waterproof. What else you need to go with it: Everything required for installation on all Harley Davidson's with a side mounted horn is included with every Love Jugs package. Optional Frame mounting kits are available for many Harley models. The Frame mount kits provide the most secure and best possible mounting positioning, and most importantly, remove the cooling system and horn from the engine and mounts it to the bike's frame. These useful options do for excessive vibration what Love Jugs do for excessive heat - they solve the problem. What they fit: Love Jugs fit 98% of all Harley Davidson's. If your Harley has a left side mounted horn, Love Jugs will bolt on to your bike in 15 - 45 minutes depending on the desired installation method. For 2014- H-D Touring models, order an 8-pin power adapter, Dennis Kirk PART NO. 49-02693 for plug-n-play installation. The most important detail for maximum performance and longevity of your Love Jugs is how you install them on your bike. Currently, there are four installation options. They are listed in order of desirability, with option# 4 being the most desirable. STANDARD ENGINE MOUNT: Mount your Love Jugs to the engine via the Harley horn mounting bracket with the supplied thick vibration damper. Pros .. Everything for a horn mount installation is included in our box. The average installation time is about half an hour. Cons .. Your Love Jugs and horn assembly are mounted to your engine via the Harley horn mounting bracket. This will vibrate the most of the four available installation options. Optional VIBRATION MASTER (Part No. 27-5035/VM-1). The Vibration Master is the most desirable option if your bike will not accept our Frame Mount Kit. The V-M is an attractive and Heavy Duty method of mounting your Love Jugs to your engine via the Harley horn mounting bracket. Its a real work horse. Two heavy duty vibration dampers encased in a highly polished Stainless Steel enclosure, replace the stock Harley vibration damper. The V-M is guaranteed against any type of failure for 5 years. Pros .. A very secure and attractive mounting method that is superior to mounting your Love Jugs directly to the Harley horn mounting bracket. The V-M positions your Love Jugs perfectly for maximum cooling effectiveness. Installation time is about 5 minutes. Will still look perfect 10 years from now due to the Stainless Steel construction of the Vibration Master. Cons.. Love Jugs are mounted directly to the engine. As reported by our customers there is a significant reduction of vibration to the Love Jugs on most models, but it is not as effective on some bikes. Why is that? Many factors that a

Dennis Kirk
349.00 €
Voir l'Offre

Ultralight Slimline 4-Step Ladder - Lagoon - FrontgateagrandirUltralight Slimline 4-Step Ladder - Lagoon - Frontgate
Weighing a mere 11 lbs. and measures just 2 when folded, our Ultralight Slimline 4-Step Aluminum Ladder is our lightest deep-step ladder. It's crafted from aircraft-grade aluminum and features an 8-1/2-deep nonslip platform for extra stability.Nonmarring leg tips with nonslip rubber feet protect floors while keeping the ladder steady.. Conforms to ANSI Type I commercial standards. 250-lb. capacity. Just 2 thick when folded. 8-1/2-deep top platform. View operating instructions.

Frontgate
119.95 €
Voir l'Offre

Cleveland 110580 OEM Drain/Fill Asy;10agrandirCleveland 110580 OEM Drain/Fill Asy;10
Cleveland 110580 Drain/Fill Asy;10. 110580 From Cleveland

WebstaurantStore
687.58 €
In Stock
Voir l'Offre

Affiner par














Produits: 1501

     Copyright 2014 par webozone pour http://comparateur-shopping.com © 2017          Qui sommes-nous | Contactez-nous